Combination (off-grid/grid-tied) hybrid power



DEIF controllers ensure uninterrupted power through intelligent management of hybrid power sources and instant changeover from grid to off-grid power, or vice versa, as necessary.

Our controllers help you add sources to your energy mix and combine them as needed when stability issues or financial considerations prompt you to use less grid power. With ongoing power and load metering, DEIF solutions instantly switch to another source in your plant if production cannot keep up with demand. One example of this is using sky imager software to predict when PV production is likely to drop and bringing other power sources such as gensets online.

Maximising sustainable power

In combination applications, our solutions automatically adjust power and reactive power references with grid support if frequency or voltage drops, and they rotate gensets to automatically ensure the most fuel-optimised running mode through various load demands. In grid-tied operation, all gensets can be stopped to maximise sustainable power penetration, and our controllers facilitate the use of energy storage systems (ESS) to store green power, provide fast backup, and carry out peak shaving and load sharing. You can configure load-dependent genset start/stop (with a genset controller) and minimum genset load constraints (with a PV controller).

Many ESS options

Adding an ESS gives you many design options. Like a genset, it can provide spinning reserve functionality to ensure uptime, and it can be configured to ensure optimal genset load. You can use energy source or power source control, and the ESS can run in grid-forming, grid-following, or droop mode (acting as a virtual synchronous generator). You can base charging/discharging on schedular command timers and set up the ESS to communicate with a BCU, BMS, or PCS over Modbus.

Greenfield power management solution

  • Solar, storage, wind, mains, and genset integration in hybrid applications
  • ASC-4 sustainable controllers and AGC-4 Mk II/AGC 150 let you control up to 32 gensets
  • Applications with up to 16 sustainable power plants
  • Maximised sustainable power penetration
  • Ideal for self-consumption applications
  • Priority of connected power sources can be defined and changed
  • Built-in power metering
  • Highly customisable with user-friendly M-Logic tool


Click on the green dots to learn more about our products

New 3D Grid Tied Hybrid Power Web


Onsite & consultancy services

Need help installing, commissioning, or repairing DEIF equipment, or consultancy services to complement your in-house skills? Our network of Service Centres and expert back-office staff are ready to support you – wherever you are, and whatever you need.

See how we can help you

Premium remote & cloud services

If you need immediate assistance with a DEIF power management system, call us 24/7 to get remote access support. We set up a secure online connection to identify, diagnose, and resolve system issues, getting you back in action quickly and maximising operational security.

Discover how it works

 

Find more knowledge

Get industry insights and fresh inspiration from DEIF – free of charge!

Visit our blog

Experience our webinar 

Read our whitepaper



Support

Complete product support

We help you keep your assets running reliably and efficiently with support services such as software updates, repair services, a solutions knowledge base, and a full range of spare parts throughout the product lifecycle – and much more, all over the world.

Get an overview

Support portal

Take advantage of the various available resources on our support portal. Explore our knowledge base to find articles and solutions.

Find more knowledge

Get industry insights and fresh inspiration from DEIF – free of charge!

Visit our blog

Experience our webinar 

Read our whitepaper



Detailed documentation

Make the most of the features of your equipment, now and in future, with relevant, detailed, and up to date documentation for all DEIF products. It’s all available on our website – from operator manuals and installation instructions to data sheets and certifications.

Find what you need

 

Find more knowledge

Get industry insights and fresh inspiration from DEIF – free of charge!

Visit our blog

Experience our webinar 

Read our whitepaper



Hands-on product training

Training Atlas Copco 1

Unleash the full potential of your DEIF products with our hands-on operator and technician training. Sessions are carried out in a risk-free environment at DEIF premises, teaching you how to make efficient use of our products with zero risk of damage to your systems.

Book your course today

 

Find more knowledge

Get industry insights and fresh inspiration from DEIF – free of charge!

Visit our blog

Experience our webinar 

Read our whitepaper



MVR

MVR (1)

The MVR-200 series provides an optimal protection and control solution for any utility, power plant, wind power, offshore, marine, industrial, commercial or institutional electrical protection. 

Read more



Instruments and switchboard accessories

DEIF offers a wide range of analogue meters, transducers, multi-instruments and hour-counters. The product range also comprises various current transformers for standard AC measurement and AC protection.

Read more



AGC 150 Mains

AGC150 20Pct

The AGC 150 Mains controller can synchronise one or two breakers (mains breaker and tie breaker) plus protect and monitor the utility.

Read more

AGC-4 MK II

AGC 4 Mk II[2925]

The automatic genset controller AGC-4 Mk II is the world’s most comprehensive genset controller offering all necessary functions for protection and control

Read more

 

* Don’t forget to check out our switchboard and instrument accessories and HMI panels  



ASC-4 Solar

ASC 4 Solar

Ideally suited for greenfield hybrid power plants, the ASC-4 Solar controller can interface with other DEIF controllers and a wide range of PV inverters, enabling you to integrate solar power in greenfield applications and maximise sustainable power penetration.

Read more

ASC 150 Solar

ASC 150 Solar Front

The ASC 150 Solar provides effective, flexible, and scalable photovoltaic (PV) inverter control with a wide range of options for greenfield and brownfield hybrid power applications.

Read more



ASC- 4 Battery

The ASC-4 Battery lets you quickly and easily add energy storage systems (ESS) such as batteries in greenfield hybrid applications with other DEIF controllers, providing seamless energy storage in commercial and industrial applications.

Read more

ASC 150 Storage

The ASC 150 Storage provides effective, flexible, and scalable energy storage system (ESS) control with a wide range of options for greenfield and brownfield hybrid power applications.

Read more



ASC-4 Wind

With its ability to control one turbine or an entire wind park, the ASC-4 Wind sustainable controller allows integration of wind power in any power plant. It can be used in an intelligent power or energy management system (PMS/EMS), balancing sources to cover demand while maximising renewable power penetration. The ASC-4 Wind is available as a fully customised solution for specific projects and is ideally suited for hybrid microgrid applications.

Read more

 

* Don’t forget to check out our switchboard and instrument accessories and HMI panels  



AGC 150 Genset

The AGC 150 Genset controller containing all necessary functions for control and protection of a genset. The slim design makes the genset controller suitable for paralleling even small gensets thus the AGC 150 is integrable in nearly all types of gensets.

Read more

AGC 4 MK II

The automatic genset controller AGC-4 Mk II is the world’s most comprehensive genset controller offering all necessary functions for protection and control

Read more



DVC 550

DVC 550 Top

DVC 550 is a digital AVR designed for alternators with SHUNT, AREP or PMG excitation. The voltage controller monitors and regulates the alternator output voltage. 

Read more

DVC 350 (Angle2)

DVC 350

The DVC 350 is a cost-effective digital AVR that offers a wide range of alternator protections and functions. Its digital setup options make it ideally suited for volume production.

Read more



Read our hybrid application guide


Generator Controller delivery

Short lead times and timely delivery


Our extensive manufacturing capacity allows us to meet any volume demand – regardless of geographical destination. We work hard to make sure our customers receive orders as quickly as possible, and we ship standard products in less than 7 days.

We manufacture all our products in-house at our Danish HQ in Skive to ensure we continue to meet demand and reduce customer lead times. So if you are struggling to get hold of control products through your usual supply channels, there has never been a better time to talk to DEIF.

  • Jda

    Contact us to discuss your options

    - 90 years of energy pioneering
    - Manufactured at the highest standards
    - Superior quality
    - Unmatched service and support
    - Made in Denmark