Produktschulungen

Choose country

PPU 300

Service level Read more
12.11.2019 - 13.11.2019
Skive, Denmark
EUR 850
Waiting list
Register Read more

PPU 300 Service

The two-day training course is for operators and service technicians. You will learn the basic functions of the PPU 300 controller and how to carry out daily routine operations When familiar with the primary functions you will proceed with more advanced tasks such as setting up, troubleshooting and commissioning typical genset applications. 

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

PPM 300

Service level Read more
14.11.2019 - 15.11.2019
Skive, Denmark
EUR 850
Waiting list
Register Read more

PPM 300 Service

The two-day training course is for operators and service technicians. You will learn the basic functions of the PPM 300 controller and how to carry out daily routine operations. When familiar with the primary functions you will proceed with more advanced tasks such as setting up, troubleshooting and commissioning typical genset applications.

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

AGC

Service level Read more
26.11.2019 - 27.11.2019
Skive, Denmark
EUR 850
Few seats left
Register Read more

AGC

  • This training course is for service technicians and engineers who commission and troubleshoot genset operations.

Your outcome

  • You will learn how to use the different configuration inputs, modes of operation, and how to change protection settings.
  • You will learn how to use the controller and obtain in-depth knowledge of the functionalities it offers.
  • You will learn how to access the menus from the front panel display screen to activate, commission and troubleshoot typical applications. Input from you on your typical applications further build these skills.
  • You will learn how to connect the utility software and configure I/Os, parameter settings, and additional operator panels (AOP). This will also involve tuning of PIDs, synchronisation and using the utility software as a troubleshooting tool.

Course prerequisites

Attending the AGC advanced training session presupposes completion of the AGC Service course. 

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

PPM 300

Service level Read more
03.12.2019 - 04.12.2019
Skive, Denmark
EUR 850
Available
Register Read more

PPM 300 Service

The two-day training course is for operators and service technicians. You will learn the basic functions of the PPM 300 controller and how to carry out daily routine operations. When familiar with the primary functions you will proceed with more advanced tasks such as setting up, troubleshooting and commissioning typical genset applications.

Your outcome

  • You will learn the basic menu functions of the genset controller and become acquainted with the menu structure
  • You will learn how to use the controller and obtain in-depth knowledge of the functionality it offers.
  • You will learn how to use the different configuration inputs, modes of operation and how to change protection settings.
  • You will learn how to connect the utility software, configure I/O’s, parameter settings etc.

Training is a cornerstone to success

With the rapid advances in generator control and the increasingly sophisticated communication between engines themselves, it has become more necessary than ever for operators and service personnel to receive hands-on training.

DEIF commits to providing our customers with the information and resources necessary for the efficient use of our products. To that end, we offer training sessions for you and your associates to help you learn how to use DEIF generator controllers and software appropriately on our simulation equipment around the world. Attending a DEIF training session will enable you to provide your customers with cost-efficient solutions that meet all common requirements.  

We believe in learning by doing. Thus our courses involve hands-on training with simulation and emulation equipment in a clean, hazard-free, and controlled environment. Together we will simulate and troubleshoot a wide range of typical fault conditions and also applications based on input from the course participants without risking damage to your plant.

The sessions are carried out in small groups for greater flexibility and more involvement.

Register Close

Für einen optimalen und effektiven Einsatz unserer Produkte bieten wir unseren Partnern Schulungen vor Ort oder in einem unserer Schulungscenter an. Wir haben die Möglichkeit, Applikationen mit allen Details und Fehlerarten in einer Testanlage zu simulieren, gefahrenfrei, in einer sauberen und kontrollierten Umgebung.

Alle Trainings werden in kleinen Gruppen durchgeführt. Dies ermöglicht Flexibilität und Effektivität und bietet viel Zeit für praktische Übungen.

Gerne unterbreiten wir Ihnen ein unverbindliches Angebot. Wir freuen uns auf Ihre Anfrage.

Maximieren Sie Ihren geschäftlichen Erfolg

Vielfach ausgezeichneter globaler Lieferant von innovativen Power-Management-Lösungen, Motor- und Aggregatstuerungen, Schalttafelausrüstungen, Schiffsbrückeninstrumenten und Steuerungen für erneuerbare Energien.

Arten der Stromerzeugung

DEIF LAND POWER zeigt neue Wege auf, wie sich Leistung und Effizienz für die Märkte IPP, Miet-/Leihgeräte, kritische Energie und Standby-Energie steigern lassen. Unsere Lösungen, Produkte und Dienstleistungen eignen sich für alle Formen der dezentralen Energieerzeugung.

Sind Sie auf der Suche nach Software, Dokumentationen oder Whitepapers?

Als charakteristisches Markenzeichen bietet DEIF schon seit Jahrzehnten uneingeschränkten kostenlosen Zugriff auf Software-Updates, detaillierte technische Produktdokumentationen sowie aufschlussreiche und inspirierende Whitepapers zu branchenrelevanten Zukunftsthemen.