MVR FW 250 series

MVR FW 250 series

You have chosen to download our software.

Within a few seconds, you will receive an email containing a download link.

Having trouble using the software? Please contact support@deif.com. 

Best regards, 

DEIF A/S

The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software

2.5.7.1-245

New features 

  • Hardware: Support for T option card (1 x mA output - 4 x mA input).
  • Function: DIF (Idx>) [87T] and GMAG: Individual setting groups (SGS2). 
  • Generator module: Nominal scaling manual mode. 
  • VRG1 (Vreg) [90]: Parallel Voltage Regulator.
  • GMAG: Excitation current to mA Out channel selection. 
  • HMI: Alarm view colour selector. 
  • HMI: Arabic language to start screen. 
  • HMI: Chinese font support for objects. 
  • Communication: Ethernet GOOSE storm protection parameter. 
  • Communication: Double Ethernet PRP ports parameter.
  • Communication: Support for PTP power profiles and VLAN-tagged frames. 
  • Communication: Scaled analogue inputs to IEC 104. 
  • Communication: CTS2 to IEC 61850 mapping. 
  • Communication: URX1 and URX2 [21X] conditions to IEC 61850. 
  • Communication: VHZ1 (2) conditions to IEC 61850. 
  • Communication: Capacitor Protection Module Conditions COL1/2 and CNU1 to legacy protocols. 
  • Communication: U3/U4 frequency to IEC 61850. 
  • Communication: Switch positions added to GOOSE.
  • Communication: GOOSE analogue values added to HMI and programmable stages.

Changes

  • Pole Slip [78]: Function improvements.
  • Synchro check [25]: Added LL/DL/LD/DD mode, ability to select line or bus as reference, additional signals. 
  • HMI: Default mimic updated to light theme. 
  • HMI: Several menu item and text adjustments, addition of function ANSI codes. 
  • Fault register: "Fault values register" and "Measurement value recorder" renamed to “Fault register”.

 

Corrections

  • Synchro check [25]: SYN2 and SYN3 force status. 
  • Current transformer supervision: Current transformer supervision functionality was not working if delay was not zero. 
  • Directional overcurrent (Idir>) [67]: Protection blocking set start to zero. 
  • Current unbalance (I2>) [46]: Adjustments to IDMT tripping time calculation. 
  • Voltage regulation (Vreg) [90]: Scaling curve positions were not working. 
  • Frequency measurement: Min/Max tracking frequency allowed limits were not working. 
  • Frequent start FSP (N>) [66]: Frequent start stage was not working correctly.
  • Logic: >= comparator was also activated on negative values. 
  • Objects: Default user level changed from operator to configurator. 
  • HMI: Push buttons were in undefined state after reboot if set to toggle mode. 
  • HMI: Reset to factory defaults will now reboot HMI and clear mimics and fault registers correctly. 
  • HMI: Custom event description display on event list. 
  • HMI: Vector and trip time characteristics.
  • HMI: Measurement bar scaling. 
  • Disturbance recorder: Recording failed when device name was more than 28 characters. 
  • Disturbance recorder: Issues saving digital outputs to "REC Digital channels" - selection. 
  • Underexcitation protection (X<) [40]: RX circle radius was renamed from diameter to radius to reflect intended functionality.
  • Frequency protection f>/< [81O/81U]: fmeas/fset value was always zero. 
  • Harmonics measurement: Harmonic measurement percentage values were "Infinite". 
  • NOC1 (I>) [50/51]: Fault register was not showing fault phases correctly. 
  • Communication/ IEC 61850: Energy measurement demand values not updating. 
  • Communication/ IEC 61850: UCP1 (IUC>) [46C]: UIC Testout event inconsistency. 
  • Communication/ IEC 61850: SOTF: SOF1GGIO1 condition check not updating.

2.5.7.1-245

28.03.2025

New features 

  • Hardware: Support for T option card (1 x mA output - 4 x mA input).
  • Function: DIF (Idx>) [87T] and GMAG: Individual setting groups (SGS2). 
  • Generator module: Nominal scaling manual mode. 
  • VRG1 (Vreg) [90]: Parallel Voltage Regulator.
  • GMAG: Excitation current to mA Out channel selection. 
  • HMI: Alarm view colour selector. 
  • HMI: Arabic language to start screen. 
  • HMI: Chinese font support for objects. 
  • Communication: Ethernet GOOSE storm protection parameter. 
  • Communication: Double Ethernet PRP ports parameter.
  • Communication: Support for PTP power profiles and VLAN-tagged frames. 
  • Communication: Scaled analogue inputs to IEC 104. 
  • Communication: CTS2 to IEC 61850 mapping. 
  • Communication: URX1 and URX2 [21X] conditions to IEC 61850. 
  • Communication: VHZ1 (2) conditions to IEC 61850. 
  • Communication: Capacitor Protection Module Conditions COL1/2 and CNU1 to legacy protocols. 
  • Communication: U3/U4 frequency to IEC 61850. 
  • Communication: Switch positions added to GOOSE.
  • Communication: GOOSE analogue values added to HMI and programmable stages.

Changes

  • Pole Slip [78]: Function improvements.
  • Synchro check [25]: Added LL/DL/LD/DD mode, ability to select line or bus as reference, additional signals. 
  • HMI: Default mimic updated to light theme. 
  • HMI: Several menu item and text adjustments, addition of function ANSI codes. 
  • Fault register: "Fault values register" and "Measurement value recorder" renamed to “Fault register”.

 

Corrections

  • Synchro check [25]: SYN2 and SYN3 force status. 
  • Current transformer supervision: Current transformer supervision functionality was not working if delay was not zero. 
  • Directional overcurrent (Idir>) [67]: Protection blocking set start to zero. 
  • Current unbalance (I2>) [46]: Adjustments to IDMT tripping time calculation. 
  • Voltage regulation (Vreg) [90]: Scaling curve positions were not working. 
  • Frequency measurement: Min/Max tracking frequency allowed limits were not working. 
  • Frequent start FSP (N>) [66]: Frequent start stage was not working correctly.
  • Logic: >= comparator was also activated on negative values. 
  • Objects: Default user level changed from operator to configurator. 
  • HMI: Push buttons were in undefined state after reboot if set to toggle mode. 
  • HMI: Reset to factory defaults will now reboot HMI and clear mimics and fault registers correctly. 
  • HMI: Custom event description display on event list. 
  • HMI: Vector and trip time characteristics.
  • HMI: Measurement bar scaling. 
  • Disturbance recorder: Recording failed when device name was more than 28 characters. 
  • Disturbance recorder: Issues saving digital outputs to "REC Digital channels" - selection. 
  • Underexcitation protection (X<) [40]: RX circle radius was renamed from diameter to radius to reflect intended functionality.
  • Frequency protection f>/< [81O/81U]: fmeas/fset value was always zero. 
  • Harmonics measurement: Harmonic measurement percentage values were "Infinite". 
  • NOC1 (I>) [50/51]: Fault register was not showing fault phases correctly. 
  • Communication/ IEC 61850: Energy measurement demand values not updating. 
  • Communication/ IEC 61850: UCP1 (IUC>) [46C]: UIC Testout event inconsistency. 
  • Communication/ IEC 61850: SOTF: SOF1GGIO1 condition check not updating.

Auf dieser Seite können Sie Software-Updates für Ihr(e) Produkt(e) herunterladen und sich verschiedene Utility-Tools und Add-ons beschaffen, die Ihnen beim Einrichten und Konfigurieren Ihres Produkts/Ihrer Produkte sowie bei der entsprechenden Fehlersuche behilflich sein können.

Beachten Sie bitte, dass nicht alle unsere Produkte vom Benutzer aktualisiert werden können. Es werden auch nicht alle unsere Produkte mit einem Utility-Tool geliefert. Somit kann die Liste auf dieser Seite nicht als Übersicht unseres kompletten Produktsortiments angesehen werden.

DEIF registriert Ihren Download zusammen mit der verwendeten E-Mail-Adresse, um Ihnen auf Anfrage Informationen zu künftigen Updates zuzusenden.

DEIF kann nicht für die Folgen fehlgeschlagener Produkt-Updates oder die Nutzung von Utility-Tools haftbar gemacht werden. Auch haftet DEIF A/S nicht für die Folgen einer Verhaltensänderung von Produkten aufgrund eines Software-Upgrades. Es obliegt stets dem Anwender, vor der Inbetriebnahme die korrekte Einrichtung und Konfiguration sicherzustellen. Sehen Sie sich vor der Aktualisierung des Produkts das Versionsprotokoll der Software an.

Lizenzvereinbarung für den Software-Download von www.deif.com

Heruntergeladene Software bleibt Eigentum von DEIF. Die Software wurde möglicherweise nicht für gewerbliche Zwecke ausgegeben, sie wurde vollständig oder partiell geändert oder wiederverwendet oder sie wurde an jedwede Drittanbieter verkauft.Auf dieser Seite können Sie Software-Updates für Ihr(e) Produkt(e) herunterladen und sich verschiedene Utility-Tools und Add-ons beschaffen, die Ihnen beim Einrichten und Konfigurieren Ihres Produkts/Ihrer Produkte sowie bei der entsprechenden Fehlersuche behilflich sein können. 

Die aktuellste Version für volle Funktionalität

Wir empfehlen Ihnen, die von uns bereitgestellten Updates zu installieren, um so das volle Potenzial Ihres DEIF-Produkts nutzen zu können.

Die gesamte optimierte Software kann nach Belieben unter www.deif.com heruntergeladen werden. Navigieren Sie dazu zu „Software“ und dann zu „Software-Download“.

Bei Fragen oder Problemen beim Auffinden der entsprechenden Software für Ihr Produkt wenden Sie sich telefonisch unter der Rufnummer +45 96149614 an DEIF A/S oder an die jeweilige lokale DEIF-Niederlassung. Alternativ können Sie uns auch eine E-Mail an support@deif.com senden. Wir helfen Ihnen gerne weiter.