Multi-line 2 Utility Software v.1.x. 1.40.102

Multi-line 2 Utility Software v.1.x. 1.40.102

You have chosen to download our software.

Within a few seconds, you will receive an email containing a download link.

Having trouble using the software? Please contact support@deif.com. 

Best regards, 

DEIF A/S

The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software

1.40.102

22.08.2006

New feature:

  • Support of PPU/GPC with synchronization of gen-set over step-up-transformer

1.43.0

26.04.2013

This software applies to the following DEIF products:

  • Multi-line 2 - AGC v.2.xx
  • Multi-line 2 - GPC v.2.xx
  • Multi-line 2 - GPU v.2.xx
  • Multi-line 2 - PPU v.2.xx
  • Multi-line 2 - BGC
  • Multi-line 2 - MDR
  • Multi-line 2 - EC-1/GC-1
  • Multi-line 2 - PPM v.2.xx
  • Multi-line 2 - AGC v.1.xx

New features:

  • Inclusion of an EULA in the installation script.
  • Option N configuration tool added to the software package (launchable from USW 1)

Changes:

  • Support for Gempac 2.60.01.43.0

1.42.0

07.10.2011

New features

  • USB driver for 64 bit Windows XP, Vista or 7.

Changes

  • Trending and data tracer improvements.
  • Improved support of serial to tcp-ip converter.
  • Irrelevant log columns not included when exporting logs to an Excel file.
  • Alarm entries updated correctly after Logs retrieva

1.41.0

02.09.2010
  • Support of “Special VG” 2.32.0

1.40.44

01.09.2009

New features:

  • Data tracing of VDO measurements added for BGC units

Changes:

  • Other minor adjustments 

1.40.23

18.02.2009
  • Configuration files updated for EC-1/GC-1 (”remote start pulse” issue fixed) 
  • Trending improvements 
  • Value rounding issue for parameters setpoint fixed 
  • Scaling of plant view instruments improved for high voltage values 

1.40.116

15.07.2008

New features:

  • New BGC 2.32.0 parameters
  • Views for ADEC support 

1.4.0.115

27.03.2008
  •  Support for additional parameters.

1.4.0.114

11.01.2008
  • Writing of parameters to BGC versions 2.10.0 – 2.31.3 updated.

1.4.0112

04.12.2007
  • Support of PPM 2.52

1.4.0.111

14.05.2007

New features:

  • Ec-1/GC-1 new digital input function, remote puls start
  • EC-1/GC-1 new digital input function, remote puls stop
  • EC-1/GC-1 new relay output function, auto mode indication

Changes:

  • Updated PPM parameterfile.
  • Updated GPU parameterfile
  • Updated BGC parameterfile

1.4.0.109

01.02.2007

Changes:

  • Support of OEM customer updated.

1.40.106

16.10.2006

New feature:

  • Configuration of N option added.
  • Option EF5 added.
  • Option A4 handling updated.

1.40.105

26.09.2006

New feature:

  • Support of GC-1 customised products 

1.40.102

22.08.2006

New feature:

  • Support of PPU/GPC with synchronization of gen-set over step-up-transformer

1.40.92

02.08.2006

Changes:

  • EC-1 / GC-1 parameter file updated
  • GC-1 Plant view updated
  • BGC M-Logic command adjusted

1.40.98

06.06.2006

New features:

  • USW support of USB connection.

Changes:

  • Configurable input "MB spring load" and "GB/TB spring load" supported for AGC.
  • Parameter file updated for AGC.
  • Initial USW connection sequence modified

1.40.94

27.03.2006

Changes:

  • Updates made in MLogic for AGC.

1.40.93

08.03.2006

Changes:

  • BGC parameter file updated.
  • Frequency scaling for EC-1 / GC-1 updated.
  • Input / output function updated.

1.40.91

12.01.2006

New features:

  • Auto reset added for BGC 2.20.0 (Self-acknowledge)
  • Number of languages to download in the ML-2 unit can be selected by the user. Support for BGC 2.20.0 and later. Support for AGC / AGC Mains 2.33.0 and later.
  • Printout for views, inputs, outputs, mlogic.
  • Support for PPM. 

Changes:

  • Consistency check updated.
  • Printout of parameters updated.
  • M-Logic updated.
  • View download updated.
  • Various parameter-, Input-, Mlogic- and view-files updated.

1.40.86

29.11.2005

Changes:

  • EC-1 / GC-1 parameterlist updated.
  • Plant view for EC-1 / GC-1 updated.
  • Translation symbol table added for AGC 2ce.
  • Boot mode download for EC-1 / GC-1 updated.
  • Consistency check and parameter download updated.
  • Download of MLogic files updated.
  • AGC xml files updated.
  • Download of GSM phone numbers updated.

1.40.82

03.11.2005

New features:

  • Support for AGC 2ce
  • Support for CAN IO Box

Changes:

  • BGC parameterlist updated.
  • BGC analogue input 1-4 readings added.
  • BGC MLogic updated.
  • BGC Input "Reset analogue Gov." renamed to "Reset ana. GOV/AVR".

1.40.80

05.10.2005

New features:

  • Support for GC-1
  • Support for EC-1 option H1

Changes:

  • BGC parameterlist updated.
  • Data Tracer updated.
  • Updates for AGC 2.3x.x

1.40.65

04.07.2005

New features:

  • Support for EC-1
  • Configurable outputs added
  • Cable supervision added
  • Support of MDR-2 Option C4 block protection added

Corrections:

  • Pointer graph on Plant view updated

1.40.66

04.05.2005

Changes:

  • Adjustments regarding storing of parameter file made
  • Power graph on plant view updated for ML-2 AGC

1.40.57

02.02.2005

New features:

  • Updated to support BGC 2.00.0
  • Handling of AGC 1.50.0 and older updated.

1.40.55

14.01.2005

New features:

  • Option M13 2 added for BGC
  • MAN and BLOCK mode selection added for AGC in MLogic.
  • MLOGIC version 1002 needed to obtain functionality.
  • Option H5 and H6 for AGC added
    Support new features in AGC regarding mode and absolute versus relative running hour calculation

Changes:

  • Configuration of input for standard ML2 improved

1.40.48

30.11.2004

New features:

  • Support of AGC 2.10

Changes:

  • Other minor adjustments

1.40.37

21.06.2004

New features:

  • BGC interface extended

Changes:

  • Option dependencies adjusted
  • Option Y4 added to BGC
  • Option H4 settings adjusted

1.40.36

05.05.2004

New features:

  • Configurable inputs added for AGC Mains
  • More digital inputs available for MLogic

1.40.35

14.04.2004

New features:

  • Support of new comm. options added (H6 Cummins Engine Interface Communication (EIC) and H5 CAN EIC)
  • Update button for I/O status implemented

Changes:

  • Adjustments for support of Std. Application version 2.30
  • Adjustments for support of AGC application version 2.00
  • Minor text changes

1.40.29

19.01.2004

Changes

  • Option M20 is supported for PPU/GPC
  • Handling of "Block loss of mains" configuration
  • Default communication port is set to no. 1
  • Date format is matching ML-2 display format
  • Possibility for re-use of old parameter-file extended
  • Text in edit dropdown box changed from 'relay' to 'output'
  • Logic configurations possibilities extended
  • Possibilities for configuration of views are extended for the BGC
  • Extensions for support of new functions in BGC is added

1.40.26

27.11.2003

Changes:

  • Handling for Texts for engine comm. in BGC added
  • Viewing MDR-2 data is improved
  • AGC Option A2 is corrected
  • Option matrix is trimmed
  • Menu 4960 added for voltage trip
  • Spelling of 'Emergency' changed
  • Parameters for AGC option C2 is added

1.40.19

30.07.2003
  • Support of MDR-2 added
  • BGC interface extended
  • Parameter file for PPU software adjusted
  • Added energy measurement to views
  • Inhibit-configuration functionality extended for some products

1.40.14

06.07.2003
  • Some ‘View’-possibilities are changed
  • BGC functionality adjusted 

1.40.9

03.06.2003

Changes:

  • XML files updated
  • Prepared for handling BGC applications

1.40.6

27.05.2003

Changes:

  • XML files updated
  • Parameter file for PPU/GPC/GPU applications changed

1.40.5

23.05.2003

New features:

  • Failclass is supported for AGC-products
  • RUN as enable-parameter implemented for AGC-products
  • Parameter list updated for AGC-products

1.40.0

02.03.2003

New features:

  • Performance improved regarding PPU/GPU/GPC
  • Layout adjusted for PPU/GPU/GPC

1.30.84

11.10.2002

New features:

  • Performance improved regarding PPU/GPU/GPC

1.30

25.09.2002

New features

  • All ML-2 units are now supported (AGC+PPU+GPU+GPC)
  • Improved trending
  • Improved option handling
  • Improved IO-handling
  • Improved user interface 
  • Version Info -file added.
  • Settings files updated - must be reinstalled.

1.22

09.04.2002

New features:

  • Ready for new feature in ml-2 std ver 1.60.x

Corrections:

  • Problem with download under Win95/98 has now been fixed.

1.20

21.11.2001

New features:

  • Ready for option EF
  • Font in print changed to ANSI_FIXED_FONT
  • Edit of view windows.

1.10

12.10.2001

New features:

  • Handling of option M1
  • Print function
  • Double click on a '.ml2' file opens the file
  • Restore window size when started

1.03

22.08.2001

New features:

  • Can handle timers with 1/100 resolution.
  • New I/O dialog.
  • Ready for options in std. V 1.45.